Skip to content

Connect Nuki and use locks ​

Connect your Nuki account to the selected workspace. Account connection and usable lock capacity are separate: one account may contain several locks, while capacity is booked per lock.

Before you start ​

You need permission to manage system connections and access to the Nuki account. The specific lock, its connectivity and, where required, its Smart Hosting Service must support the intended use.

Connect the account ​

  1. Open System connections → Add integration, then Connect Nuki.
  2. Enter a clear connection name.
  3. Choose Connect to Nuki (new tab) and approve the requested access at Nuki.
  4. Return to octopancy and check the successful connection. Opening the Nuki tab alone does not confirm completion.
  5. Open the connection, review imported devices and assign supported locks to their location.

Control and check the result ​

Configure a matching control on the unit. Under Locations → your location → Controls, operate supported locks with the required permissions. Reconciled state determines the action offered. Unknown state or a disconnected live connection disables it.

Command accepted does not mean the door is physically open. Check the subsequent report. Effective personal access may block direct administrative control.

Repair a connection ​

Check the connection and its status message. Use reauthorization when offered and required. Disconnecting in octopancy does not automatically revoke consent in the Nuki account.

Open the connection detail page and choose Delete connection from its top three-dot menu. You do not need to disconnect first. After confirmation, the connection and its devices are removed from the device inventory and location views.

Active access and already granted future access prevent deletion. The dialog lists the affected people, units and functions. A future reservation without granted access does not prevent deletion. Resolve existing access first; octopancy checks again when you confirm.

Next: Devices and controls, guest access.

Check devices and Smart Hosting ​

Under Your Nuki devices, each card shows the lock and its location. Assign location is directly on the card. The location link opens the location's devices; assignment itself grants no access. Refresh devices is in the connection's top three-dot menu.

Smart Hosting is checked automatically when opening the page. For Smart Hosting not yet active, unknown or uncheckable status, choose Check activation in the lock menu. A 60-second cooldown follows; the countdown shows the remaining time. This query does not move the lock.

Test operation is a separate action in the lock menu. It can physically operate the lock and requires explicit confirmation. Only run it when the offered action can safely be performed at the device.